Share solution

Showing posts with label cm11. Show all posts

Saturday, September 20, 2014

How To Update Galaxy Note 2 SCH R950 To Android 4 4 2 KitKat via CM11 Nightly

Google recently introduced the Android 4.4.2 Nexus KitKat many models but builds are not many customizable. CyanogenMod team recently introduced Android 4.4.2 CM11-based KitKat build for the Galaxy Note 2 SCH-R950. You can download and install a custom firmware on Galaxy Note CM11 2 SCH-R950. continue reading this guide to find out how to install Android 4.4.2 custom ROM based KitKat CM11 on Galaxy Note 2 SCH-R950.

Warning!

This tutorial is only for Galaxy Note 2 SCH-R950. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Note 2 SCH-R950 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Note 2 SCH-R950.

5. Your device have latest ClockworkMod Recovery Installed.

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based CM11 ROM on Galaxy Note 2 SCH-R950.

File Required(Download by clicking on it)

CM11 For Galaxy Note 2 SCH-R950 [Filename: cm-11-20140106-NIGHTLY-r950.zip]
Google Apps [Filename: gapps-kk-20131119.zip]

How to Install Android 4.4.2 KitKat based CM11 ROM on Galaxy Note 2 SCH-R950

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device.Important: Don’t extract any files.
Disconnect USB and then turn off your Galaxy Note 2 SCH-R950.
Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next Lcd, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next Lcd to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advanceoption to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the CM11 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next Lcd. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the gapps-kk-20131119.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 2 SCH-R950 and boot up into Android 4.4.2 KitKat ROM CM11.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM CM11 is now installed and running on your Galaxy Note 2 SCH-R950. [Note: Root is turned off by default in CM ROMs, you must enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Thursday, September 4, 2014

How To Update Galaxy Tab 2 10 1 P5110 To Android 4 4 2 KitKat via CM11 Nightly

You can now update your Galaxy Tab 2 10.1 P5110 to latest and customized Android 4.4.2 KitKat. Google recently introduced Android 4.4.2 KitKat a many Nexus models but that build is not much customized. CyanogenMod team recently introduced Android 4.4.2 KitKat based CM11 build for Galaxy Tab 2 10.1 P5110. You can download and install custom firmware CM11 on your Galaxy Tab 2 10.1 P5110. Since, Galaxy Tab 2 10.1 P5110 is capable enough to run Android 4.4.2 KitKat smoothly, CM11 going to be a great experience for you. With nightly build you will receive update daily and bugs are fixed faster as well as new feature introduced regularly. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based CM11 custom ROM on Galaxy Tab 2 10.1 P5110.

Warning!

This tutorial is only for Galaxy Tab 2 10.1 P5110. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Tab 2 10.1 P5110 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Tab 2 10.1 P5110.

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed.

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based CM11 ROM on Galaxy Tab 2 10.1 P5110.

File Required(Download by clicking on it)

CM11 For Galaxy Tab 2 10.1 P5110 [Filename: cm-11-20140110-NIGHTLY-p5110.zip]
Google Apps [Filename: gapps-kk-20131119.zip]

How to Install Android 4.4.2 KitKat based CM11 ROM on Galaxy Tab 2 10.1 P5110

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device.Important: Don’t extract any files.
Disconnect USB and then turn off your Galaxy Tab 2 10.1 P5110.
Now, boot into recovery mode. To do so, press and hold Volume Up and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advanceoption to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the CM11 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the gapps-kk-20131119.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Tab 2 10.1 P5110 and boot up into Android 4.4.2 KitKat ROM CM11.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM CM11 is now installed and running on your Galaxy Tab 2 10.1 P5110. [Note: Root is turned off by default in CM ROMs, you must enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].

Monday, September 1, 2014

How To Update LG G Pad 8 3 V500 To Android 4 4 2 KitKat via CM11 Nightly

You can now update your LG V500 G Pad 8.3 for the latest and customized Android 4.4.2 KitKat. Google has just introduced Android 4.4.2 Nexus KitKat many models but builds are not many that are adjustable. The CyanogenMod team has just introduced Android 4.4.2 CM11-based KitKat build for LG V500 G Pad 8.3. You can download and install a custom firmware on the LG G CM11 Pad V500 8.3. Because, LG G Pad V500 8.3 capable enough to smoothly run Android 4.4.2 KitKat, CM11 will be a great experience for you. By building a night you will receive daily updates and bugs fixed faster and features introduced regularly. To learn how to flash this ROM, continue reading this guide to find out how to install Android 4.4.2 custom ROM based KitKat CM11 LG G Pad V500 8.3.

Most of the Android 4.4.2 KitKat nice features that you will enjoy is the Screen Recording, Click to Pay (Google Wallet to all people), NFC emulation for non-NFC devices, 14% use less memory, cloud printing from the gallery, is the Google Home new Launcher, core System process use, efficient and responsive applications on all devices, the memory usage of all the new tool procstats details, Immersive full-screen mode, the changes in the resolution for smooth media playback, phone dialer gets local businesses detection, Quickoffice redesigned and much more.

As said already, this is a test build and you should expect some bugs in it. All bugs and problems are expected to remain as the construction progress toward a better build.

Pre Requisites:

1. Backup your device data

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for LG G Pad 8.3 V500 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and LG G Pad 8.3 V500.

5. Your device have latest ClockworkMod Recovery Installed.

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based CM11 ROM on LG G Pad 8.3 V500.

File Required(Download by clicking on it)

CM11 For LG G Pad 8.3 V500 [Filename: cm-11-20131221-NIGHTLY-v500.zip]
Google Apps [Filename: gapps-kk-20131119.zip]

Warning!

This tutorial is only for LG G Pad 8.3 V500. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

How to Install Android 4.4.2 KitKat based CM11 ROM on LG G Pad 8.3 V500

Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device.Important: Don’t extract any files.
Disconnect USB and then turn off your LG G Pad 8.3 V500.
Boot into recovery mode. and then use following command in command prompt after connecting the device: adb reboot recovery.
Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advanceoption to perform Dalvik cache wiping.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the CM11 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
Once the ROM installation process end, repeat the step 6 but choose the gapps-kk-20131119.zip file instead of ROM zip to install the Google apps package.
When installation is completed, go back to the main recovery menu and select reboot system now to reboot your LG G Pad 8.3 V500 and boot up into Android 4.4.2 KitKat ROM CM11.
Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.

Congrats! Android 4.4.2 KitKat firmware based custom ROM CM11 is now installed and running on your LG G Pad 8.3 V500. [Note: Root is turned off by default in CM ROMs, you must enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings