Share solution

Showing posts with label bean. Show all posts

Friday, October 24, 2014

Samsung Galaxy S4 Mini GT I9195L How to Install I9195LUBUBMK3 Android 4 2 2 Jelly Bean Firmware

Samsung Galaxy S4 Mini GT-I9195L [How to Install] I9195LUBUBMK3 Android 4.2.2 Jelly Bean Firmware,

I9195LUBUBMK3 Android 4.2.2 Jelly Bean Firmware Last Updated on 22-Feb-2014. Samsung Galaxy S4 Mini GT-I9195L (LTE, Latin) received a new official firmware update which is UBUBMK3 Android 4.2.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is I9195LUBUBMK3. The device was released with Android 4.2.2 Jelly Bean and yet to receive any further android version. If you yet to update your device with this latest available official firmware then you can now update the same using our simple tutorial below. You can check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

As the Galaxy S4 Mini LTE I9195L already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 Mini I9195L to the latest UBUBMK3 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 UBUBMK3 firmware on your Galaxy S4 Mini I9195L through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy S4 Mini GT-I9195L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.2.2 Jelly Bean I9195LUBUBMK3 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 Mini GT-I9195L model.

Colombia (Comcel): I9195LUBUBMK3_I9195LUWABNA1_COM.zip
Dominican Republic: I9195LUBUBMK3_I9195LUWABMK1_CDR.zip
Colombia: I9195LUBUBMK3_I9195LUWMBMK1_COL.zip
Peru (SAM): I9195LUBUBMK3_I9195LTFGBMK3_SAM.zip
Colombia (Movistar): I9195LUBUBMK3_I9195LTFGBMK3_COB.zip
Mexico (TelCel): I9195LUBUBMK3_I9195LTCEBMK1_TCE.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy Tab 3 8.0 LTE SM-T315 [Installation Guide] T315XXUAMK1 Android 4.2.2 Jelly Bean Firmware

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I9195LUBUBMK3 official firmware on Galaxy S4 Mini I9195L.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Mini I9195L through Odin:

Download Android 4.2.2 UBUBMK3 Firmware for Galaxy S4 Mini I9195L from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy S4 Mini I9195L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 Mini I9195L to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9195LXXDLJ5_I9195LODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Thats all the above steps to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Mini GT-I9195L. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy S4 Mini should now running on the latest Android 4.2.2 Jelly Bean build version UBUBMK3. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.

Thursday, October 23, 2014

How to Update Samsung Galaxy S3 i9300 to XXDLI4 Android 4 1 Jelly Bean

In our days everyone has heard of the Samsung Galaxy S III, which enjoys great popularity among the latest generation smart phones, lately there have been many comparisons with the iPhone 5, fortunately for giant Korean the thinks are favorable because it sells very well all over the world.
The only thing where that is presently blamed for Samsung Galaxy S3 is the operating system currently based on Android 4.0.4 ICS.
As soon as he was released maker made a promise to provide a Jelly Bean as Samsung Galaxy S3 update as soon as possible. Probably, from sources that we have, this update should be available in October of this year. Until then, Samsung has elapsed, in good faith or not, some Jelly Bean updates ROMs for Samsung Galaxy S III.
A recent version seems to be i9300XXDLI4, which until now seems the most stable the fewest bugs so far, as I said is not an official version and install i9300XXDLI4 ROM can void the warranty.
Next we will focus to show you some new improvements in what can this i9300XXDLI4 leaked ROM can to do in plus:
Wi-Fi reception is improved
RAM Optimizations
Lighting problems were solved
A faster battery charging
App Drawer much smoother
Apps open really fast
Very Fast and Smooth
All major shortcomings of earlier versions seem to have resolved in this release i9300XXDLI4 stable ROM, but hopefully not too much, which is a pre-release ROM version and some minor bugs may exist.
As we Firmware details:
Android version : 4.1.1-JRO03C-Jelly Bean.
PDA: I9300XXDLI4
CCS: I9300OXADLI4
MODEM: I9300XXDLI4
Change list: 140034
Build Date: 7th September 2012
You can see in the screenshots, to finding i9300XXDLI4 ROM like on these pictures to be sure before start flashing procedure:

Samsung Galaxy S III Jelly Bean Leaked ROM

The first step is to download firmware from sammobile link
Check it has downloaded successfully.
Unzip the archive in a convenient place for the next step.
In this step, run Odin 3.04 program found in the extracted files.
When you have done this you need to restart your Galaxy S3 phone in download mode.
To do this press the power button and hold it until the loading screen appears first: Home, Volume Down button and power button.
Once yours Galaxy S III phone has successfully rebooted in the download mode, we need now to connect your smartphone to the computer using original data cable.
Now check and see if in the Odin program a yellow sign appeared in the top left corner.
Now you need to click on the PDA button in Odin and select the file name.
I9300XXDLI4_I9300OXADLI4_I9300XXDLI4_HOME.tar.md5, on the folder where you extracted archive downloaded earlier.
Next up please make sure that none of the ticks on the buttons in Odin have been messed with and also make sure that the repartition button is NOT ticked.
In the final stage, you have to press the power button and be patient as the program does its job.
Do not unplug the device during the process in any way, just waiting for your Galaxy S III phone will reboot and the Odin program will tell is done.
Congratulations! This was the update procedure.

Thursday, September 25, 2014

How To Root I9195XXUBML4 Android 4 2 2 Jelly Bean Firmware on Galaxy S4 mini I9195 Guide

An easy to follow guide to root the Galaxy S4 Mini I9195 which runs on Android 4.2.2 Jelly Bean XXUBML4 available on Android right now. If you want to enjoy the apps available in the Play Store with [Root] in the suffix or prefix then you must first eradicate the Samsung Galaxy Mini GT - I9195 S4 you. Roots are equipped with a variety of benefits including the ability to access and modify the file system, allowing the CPU or GPU overclocking and more

To eradicate the S4 Galaxy Mini I9195 which runs on Android 4.2.2 firmware XXUBML4 Jelly Bean, first of all we are going to install ClockworkMod Recovery 6.0.3.7 and then flash a custom recovery using a rootkit.

Warning: This tutorial is only for Galaxy S4 mini GT-I9195. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure. Rooting also void your manufacturer warranty.

Pre Requisites:

Though rooting usually not harmful for internal memory data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy S4 mini GT-I9195 in your PC. Download USB Drivers

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 mini GT-I9195. Guide

If you done what we stated above then you good to go for installing ClockworkMod recovery 6.0.3.7 on Galaxy S4 mini I9195 and then root it using custom recovery.

How To Root I9195XXUBML4 Android 4.2.2 Jelly Bean On Galaxy S4 mini GT-I9195 Manually

Download Odin v3.09, recovery-clockwork-6.0.3.7-serranoltexx.tar.zip and S4Mini_RootKit_v1.zip.
Copy only S4Mini_RootKit_v1.zip to your Galaxy S4 mini GT-I9195 SD card.
Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files. Now extract recovery-clockwork-6.0.3.7-serranoltexx.tar.zip and you should get recovery-clockwork-6.0.3.7-serranoltexx.tar.md5.
Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
Now, put the Galaxy S4 mini GT-I9195 in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning Lcd will come up; press Volume Up button to enter Download Mode.
Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
Click the AP Button, and select that recovery-clockwork-6.0.3.7-serranoltexx.tar.md5 file that you get in Step 3.
In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
Once flashing completed, your Galaxy S4 mini GT-I9195 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. In recovery use volume keys to navigate between options and Power button to select and option.
Select install zip from sdcard, then select choose zip from sdcard. Now, locate the S4Mini_RootKit_v1.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next Lcd. The rooting process will begin.
Optional: Flash GT-I9195_Kernel_v1.zip to use a custom stock kernel, which might fix battery drain for some.

Congrats! You just rooted your Galaxy S4 mini GT-I9195 running on XXUBML4 Android 4.2.2 Jelly Bean firmware. To confirm if you successfully rooted your Android device or not install an app called “Root Checker” which is available for free from Google PLAY store.

Wednesday, September 24, 2014

Update Galaxy S3 LTE I9305 with Android 4 3 XXUEML8 Jelly Bean Official Firmware How to

Samsung recently launched Android 4.3 Jelly Bean update others with the firmware build number I9305XXUEML8 for LTE version of the Galaxy S3 (GT-I9305). The new firmware is now officially available as an Over-The-Air (OTA) update and via Samsung Kies.MODEM: I9305XXUEMK1Versi: Android 4.3 has support Region: Singapore

Samsung Galaxy S3 (LTE) I9305 users who missed the OTA update notification or can not access the update via Samsung Kies, and those who are outside of Singapore can now download and install the same manually, using a step-by-step guide.

Pre-requisites

Install USB Drivers for Samsung Galaxy S3 on the computer.
Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
Make a backup of all your important data before following the guide.
The Galaxy S3 should be factory unlocked and not locked to any particular carrier.
Ensure the battery of the phone is charged more than 80 percent.
The Android 4.3 XXUEML8 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy S3 (GT-I9305). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

Files Required

1. Android 4.3 XXUEML8 Jelly Bean Firmware (Mirror Link 1, Link 2) for Galaxy S3 (LTE) I9305

2. Odin 3.07

Steps to Update Galaxy S3 (LTE) I9305 with Android 4.3 XXUEML8 Jelly Bean Firmware

Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Switch off the Galaxy S3.
Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Run Odin on the computer as an Administrator.
Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Select the following files in Odin from extracted I9305XXUEML8 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 (LTE) I9305 should be now updated with official Android 4.3 XXUEML8 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S3 (LTE) I9305 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Wednesday, September 17, 2014

Get Easily Update Your Samsung Galaxy Grand Duos I9082 with Android 4 2 2 XXUBNB1 Jelly Bean Official Firmware Guide Odin

Samsung Galaxy Grand Duos with model number GT-I9082 has already received Android 4.2.2 Jelly Bean update with firmware build number I9082XXUBNB1. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.
Firmware details
PDA: I9082XXUBNB1
CSC: I9082OXXBNA2
MODEM: I9082XXUBNA3
Version: Android 4.2.2
Build date: Feb 05, 2014
Regions: South East Europe, Hungary
Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.
Pre-requisites
1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.2.2 XXUBNB1 Jelly Bean firmware is compatible only with the Galaxy Grand Duos (GT-I9082). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUBNB1 Jelly Bean Firmware (Mirror Link) for Galaxy Grand Duos I9082
2. Odin 3.07

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNB1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Grand Duos.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on Lcd. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Step 7: Select the following files in Odin from extracted I9082XXUBNB1 firmware folder:

Click the PDA button and select the .tar.md5 file.
Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Duos I9082 should be now updated with Android 4.2.2 XXUBNB1 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read also: How to Root Galaxy Grand Duos I9082 on Android 4.2.2 Jelly Bean Firmware

Friday, September 5, 2014

How to Install Android 4 3 Jelly Bean E300LKLUEML1 Firmware for SHVE300L Galaxy S4 LTE

People who are waiting for all changes to the latest firmware for the Samsung Galaxy S4 SHV-E300L LTE (Korea Variant) Smartphone, can now download and install the official Android 4.3 Jelly Bean E300LKLUEML1 firmware. E300L LTE Galaxy S4 was released with Android 4.2.2 Jelly Bean and began to acquire Android 4.3 Jelly Bean since October. Incase you missed to update your device, then here we have the latest firmware for the device KLUEML1. Follow our simple tutorial below to install the firmware manually via Odin. You can check the latest firmware available for your device via OTA (over the air) from Settings-About Phone-Software Update.

If you E300L LTE Galaxy S4 already run on Android 4.3 Jelly Bean, then you can only expect a few bug fixes and performance improvements with the latest firmware update. So, want to update the Galaxy S4 to Newest KLUEML1 E300L LTE Android 4.3 Jelly Bean firmware? To install the official way, either you can go for the OTA update as mentioned above or download the firmware via utility for Samsung Kies. However, most of us prefer the manual way to update the official firmware. So, in this article you will enjoy the step by step user guide update of Android 4.3 KLUEML1 latest firmware on your Galaxy S4 E300L LTE via ODIN.

Important Note:

"The firmware is released only for the Samsung Galaxy S4 LTE SHV-E300L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.3 Jelly Bean E300LKLUEML1 Official Firmware Download List

Korea: E300LKLUEML1_E300LLGTEMK4_LGT.zip

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 E300LKLUEML1 official firmware on Galaxy S4 LTE E300L.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 LTE E300L through Odin:

Download Android 4.3 KLUEML1 Firmware for Galaxy S4 LTE E300L from the above list
Download Odin 3.07
Switch off your phone and boot Galaxy S4 LTE E300L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 LTE E300L to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: E300LXXDLJ5_E300LODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congratulations! You E300L LTE Galaxy S4 is now updated to Android 4.3 Jelly Bean and the latest official firmware. Hope you managed to do the update process. If you follow everything as mentioned in the tutorial above, then you you LTE Galaxy S4 should now be running on the latest Android 4.3 Jelly Bean build KLUEML1 version. You can confirm the details of the firmware update from Settings-About Phone. If you find a problem with the above tutorial and download link, please do not hesitate to contact with us using the comment form below ..

Tuesday, August 26, 2014

How to Install P605MUBUBMJ5 4 3 Jelly Bean Firmware On SMP605M Galaxy Note 10 1 LTE 2014

Download and install the latest P605MUBUBMJ5 4.3 Jelly Bean Official Firmware on Samsung Galaxy Note 10.1 LTE SM-P605M (2014 Edition). Samsung has just launched the firmware. This new device released by Samsung with Android 4.3 you can JB and this latest update of Android 4.3 Jelly Bean UBUBMJ5 regular firmware. Follow the tutorial below to install the firmware manually via Odin. You can check for the latest firmware available for your device via OTA (over the air) from Settings-About Tablet-Software Update.

As the Galaxy Note 10.1 LTE P605M released with the Android 4.3 Jelly Bean, you can expect few bug fixes and performance enhancements with this latest update. It is always recommended to update your device to the latest firmware available to keep updated with the latest security changes....

If you do not know, Android 4.3 Jelly Bean is equipped with many new features and changes from previous versions of android-like Multi-page feature on the lockscreen, support widget on the lockscreen, Tabbed UI in the Settings, Daydream feature, voice control feature to applications such as tablets, cameras, music players and so on, Hands-free mode, New Notification Panel with 2 pages, ANT + support, TRIM support, camera Repair, Move app to SD feature, New for for Samsung keyboard, Changed the icon for multiple applications for for Samsung, TouchWiz Fine, featuring Adapt, Adapt voice, full-screen mode for for Samsung apps and more.

So, want to update your LTE Galaxy Note 10.1 P605M to UBUBMJ5 latest Android 4.3 Jelly Bean firmware? To install the official way, you can go to the OTA update as mentioned above or download and install the firmware via Samsung Kies utility for. However, if you prefer the manual way to update the official firmware, then follow this article to find step-by-step user guide for Android 4.3 update UBUBMJ5 latest firmware on your Galaxy Note 10.1 LTE P605M via Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Note 10.1 LTE SM-P605M model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet".

Android 4.3 Jelly Bean P605MUBUBMJ5 Official Firmware Download List

Chile: P605MUBUBMJ5_P605MUUBBMJ5_CHO.zip | Link2
Colombia: P605MUBUBMJ5_P605MUUBBMJ5_COO.zip | Link2

[Firmware for rest of the countries and carrier will be added here when available]

More Recent Firmware Build

Brazil (VIVO): P605MUBUBMJ6_P605MZVVBMJ4_ZVV.zip | Link2

Pre-Requisites:

Check battery percentage, your device should have at least 90% battery power

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

BMJ5 official firmware on Galaxy Note 10.1 LTE P605M.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 10.1 LTE P605M through Odin:

Download Android 4.3 UBUBMJ5 Firmware for Galaxy Note 10.1 LTE P605M from the above list
Download Odin 3.07
Switch off your Tablet and boot Galaxy Note 10.1 LTE P605M into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 10.1 LTE P605M to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
In Odin screen, click on PDA button (if you are using the latest Odin Version, then click on AP button instead of PDA) and select the firmware file with .tar.md5 extension (The firmware file look something like: P605MXXDLJ5_P605MODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your Tablet should automatically reboot after completion
You can now disconnect your Tablet from computer
Finish

Thats all for updating firmware official Android 4.3 Jelly Bean on the Galaxy Note 10.1 LTE BC-P605M. Hope you get all the above points and successfully completed the tutorial. If you follow everything as mentioned in the tutorial above, then you P605M LTE Galaxy Note 10.1 should now be running on Android 4.3 Jelly Bean version UBUBMJ5 latest build. You can verify the details of the firmware update from Settings-About Tablet. If you have any questions or problems with the download link, do not hesitate to contact with us and do not forget to share your thoughts in the comments below.

Thursday, August 21, 2014

How to Root Samsung Galaxy Express 2 G3815 Using Android 4 2 2 Jelly Bean Firmware Guide

Samsung Galaxy Express 2 users who wish to root their devices running on Android 4.2.2 Jelly Bean, may follow the tutorial below.
This tutorial uses CF-Auto-Root file released by Senior Recognized XDA-Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Express 2 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Express 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Express 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.U Can Install This Apps Like Battery Notifier BT Free6. The CF-Auto-Root file works only on the Galaxy Express 2 (SM-G3815). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Express 2 by navigating to Settings >> About Phone.
Files Required
1. CF-Auto-Root for Galaxy Express 2 G3815 (CF-Auto-Root-wilcoxlte-wilcoxltexx-smg3815.zip)
2. Odin 3.07

Steps to Root Galaxy Express 2 G3815 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Express 2. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Express 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Reading List Our Previous Post :How to Root Samsung Galaxy Chat B5330/B/L Using Android 4.1.2 Jelly Bean Firmware Guide
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-wilcoxlte-wilcoxltexx-smg3815.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Express 2 G3815 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.