Showing posts with label install. Show all posts
Showing posts with label install. Show all posts

Friday, October 24, 2014

Samsung Galaxy S4 Mini GT I9195L How to Install I9195LUBUBMK3 Android 4 2 2 Jelly Bean Firmware

Samsung Galaxy S4 Mini GT-I9195L [How to Install] I9195LUBUBMK3 Android 4.2.2 Jelly Bean Firmware,
I9195LUBUBMK3 Android 4.2.2 Jelly Bean Firmware Last Updated on 22-Feb-2014. Samsung Galaxy S4 Mini GT-I9195L (LTE, Latin) received a new official firmware update which is UBUBMK3 Android 4.2.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is I9195LUBUBMK3. The device was released with Android 4.2.2 Jelly Bean and yet to receive any further android version. If you yet to update your device with this latest available official firmware then you can now update the same using our simple tutorial below. You can check  latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
As the Galaxy S4 Mini LTE I9195L already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 Mini I9195L to the latest UBUBMK3 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 UBUBMK3 firmware on your Galaxy S4 Mini I9195L through Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy S4 Mini GT-I9195L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.2.2 Jelly Bean I9195LUBUBMK3 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 Mini GT-I9195L model.
Colombia (Comcel): I9195LUBUBMK3_I9195LUWABNA1_COM.zip
Dominican Republic: I9195LUBUBMK3_I9195LUWABMK1_CDR.zip
Colombia: I9195LUBUBMK3_I9195LUWMBMK1_COL.zip
Peru (SAM): I9195LUBUBMK3_I9195LTFGBMK3_SAM.zip
Colombia (Movistar): I9195LUBUBMK3_I9195LTFGBMK3_COB.zip
Mexico (TelCel): I9195LUBUBMK3_I9195LTCEBMK1_TCE.zip
[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy Tab 3 8.0 LTE SM-T315 [Installation Guide] T315XXUAMK1 Android 4.2.2 Jelly Bean Firmware

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I9195LUBUBMK3 official firmware on Galaxy S4 Mini I9195L.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Mini I9195L through Odin:

oden

 

  1. Download Android 4.2.2 UBUBMK3 Firmware for Galaxy S4 Mini I9195L from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy S4 Mini I9195L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 Mini I9195L to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9195LXXDLJ5_I9195LODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Thats all the above steps to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Mini GT-I9195L. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy S4 Mini should now running on the latest Android 4.2.2 Jelly Bean build version UBUBMK3. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
Read More..

Friday, September 5, 2014

How to Install Android 4 3 Jelly Bean E300LKLUEML1 Firmware for SHVE300L Galaxy S4 LTE

People who are waiting for all changes to the latest firmware for the Samsung Galaxy S4 SHV-E300L LTE (Korea Variant) Smartphone, can now download and install the official Android 4.3 Jelly Bean E300LKLUEML1 firmware. E300L LTE Galaxy S4 was released with Android 4.2.2 Jelly Bean and began to acquire Android 4.3 Jelly Bean since October. Incase you missed to update your device, then here we have the latest firmware for the device KLUEML1. Follow our simple tutorial below to install the firmware manually via Odin. You can check the latest firmware available for your device via OTA (over the air) from Settings-About Phone-Software Update.
If you E300L LTE Galaxy S4 already run on Android 4.3 Jelly Bean, then you can only expect a few bug fixes and performance improvements with the latest firmware update. So, want to update the Galaxy S4 to Newest KLUEML1 E300L LTE Android 4.3 Jelly Bean firmware? To install the official way, either you can go for the OTA update as mentioned above or download the firmware via utility for Samsung Kies. However, most of us prefer the manual way to update the official firmware. So, in this article you will enjoy the step by step user guide update of Android 4.3 KLUEML1 latest firmware on your Galaxy S4 E300L LTE via ODIN.


Important Note:

"The firmware is released only for the Samsung Galaxy S4 LTE SHV-E300L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.3 Jelly Bean E300LKLUEML1 Official Firmware Download List


Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 E300LKLUEML1 official firmware on Galaxy S4 LTE E300L.
How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 LTE E300L through Odin:

  1. Download Android 4.3 KLUEML1 Firmware for Galaxy S4 LTE E300L from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy S4 LTE E300L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 LTE E300L to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: E300LXXDLJ5_E300LODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congratulations! You E300L LTE Galaxy S4 is now updated to Android 4.3 Jelly Bean and the latest official firmware. Hope you managed to do the update process. If you follow everything as mentioned in the tutorial above, then you you LTE Galaxy S4 should now be running on the latest Android 4.3 Jelly Bean build KLUEML1 version. You can confirm the details of the firmware update from Settings-About Phone. If you find a problem with the above tutorial and download link, please do not hesitate to contact with us using the comment form below ..
Read More..

Monday, September 1, 2014

Get LG Optimus G E970 AT T install Android 4 4 2 KitKat PAC man ROM Instant How To Guide

LG Optimus G E970 (AT&T) can be updated to latest Android 4.4.2 KitKat. The upgrade is possible with the help of custom ROM PAC-man. The development team of PAC-man ROM finally introduced Android 4.4.2 KitKat based PAC-man ROM for LG Optimus G E970 (AT&T). Which means, you can download and install custom firmware PAC-man to update your LG Optimus G E970 (AT&T) to latest Android 4.4.2 KitKat. LG Optimus G E970 (AT&T) comes with good hardware spec, hence is capable to run PAC-man smoothly. PAC-man ROM consist various features of Paranoid Android, AOKP and CyanogenMod. The link Im sharing is PAC-man nightly build. The good thing about nightly build is, you will receive update daily and bugs are fixed faster as well as new feature introduced regularly. Continue reading this guide to know how to install Android 4.4.2 KitKat based PAC-man custom ROM on LG Optimus G E970 (AT&T).
PAC-man comes with various useful customization. Since, PAC-man is based on Android 4.4.2 KitKat, you may like to know whats new on it. Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new procstats tool details memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

Please note, not all Android 4.4.2 KitKat feature yet ported to PAC-man ROM.

Another thing you should note, this is nightly build, hence expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a stable PAC-man build.
Warning!
This tutorial is only for LG Optimus G E970 (AT&T). Don’t try this guide on any other Android device. Also, we (Android Pulp Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.  
Pre Requisites:
1. ROM flashing require you to wipe your internal memory data, hence you required to backup your device data. You can follow our ultimate backup guide.
2.  Make sure your device have at least 60% battery power. If your phone shut down during installation then there is good chance to brick your device.You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You must have USB Driver Installed for LG Optimus G E970 (AT&T) in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise its wont be possible to transfer file between PC and LG Optimus G E970 (AT&T). [Guide].
5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.1 and up installed. [General Guide]
If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based PAC-man ROM on LG Optimus G E970 (AT&T).
File Required(Download by clicking on it)
  1. PAC-man For LG Optimus G E970 (AT&T)  [Filename: pac_e970-nightly-20140514.zip]
  2. Google Apps [Filename: pa_gapps-stock-4.4.2-20140207-signed.zip]
    Read Also :Android 4.4.2 KitKat PAC-man ROM Install For LG Optimus G E973 (Canada) 
How to Install Android 4.4.2 KitKat based PAC-man ROM on LG Optimus G E970 (AT&T)
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your LG Optimus G E970 (AT&T).
  3. Now, boot into recovery mode. To do so, press and hold Volume Up & Power until fastboot screen appears, then press Volume Down twice, then press Power to boot recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the PAC-man Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the pa_gapps-stock-4.4.2-20140207-signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your LG Optimus G E970 (AT&T) and boot up into Android 4.4.2 KitKat ROM PAC-man. 
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your LG Optimus G E970 (AT&T).
  3. Now, boot into recovery mode. To do so, press and hold Volume Up & Power until fastboot screen appears, then press Volume Down twice, then press Power to boot recovery. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the PAC-man Zip file. Then tap on Add More Zips, and add pa_gapps-stock-4.4.2-20140207-signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your LG Optimus G E970 (AT&T) and boot up into Android 4.4.2 KitKat ROM PAC-man.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.2 KitKat firmware based custom ROM PAC-man is now running on your LG Optimus G E970 (AT&T). Now explore the latest Android 4.4.2 KitKat. [Note: If you find difficulties to run root only apps then it may be disabled. Do this then, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings].
Read More..

Tuesday, August 26, 2014

How to Install P605MUBUBMJ5 4 3 Jelly Bean Firmware On SMP605M Galaxy Note 10 1 LTE 2014

Download and install the latest P605MUBUBMJ5 4.3 Jelly Bean Official Firmware on Samsung Galaxy Note 10.1 LTE SM-P605M (2014 Edition). Samsung has just launched the firmware. This new device released by Samsung with Android 4.3 you can JB and this latest update of Android 4.3 Jelly Bean UBUBMJ5 regular firmware. Follow the tutorial below to install the firmware manually via Odin. You can check for the latest firmware available for your device via OTA (over the air) from Settings-About Tablet-Software Update.

As the Galaxy Note 10.1 LTE P605M released with the Android 4.3 Jelly Bean, you can expect few bug fixes and performance enhancements with this latest update. It is always recommended to update your device to the latest firmware available to keep updated with the latest security changes....

If you do not know, Android 4.3 Jelly Bean is equipped with many new features and changes from previous versions of android-like Multi-page feature on the lockscreen, support widget on the lockscreen, Tabbed UI in the Settings, Daydream feature, voice control feature to applications such as tablets, cameras, music players and so on, Hands-free mode, New Notification Panel with 2 pages, ANT + support, TRIM support, camera Repair, Move app to SD feature, New for for Samsung keyboard, Changed the icon for multiple applications for for Samsung, TouchWiz Fine, featuring Adapt, Adapt voice, full-screen mode for for Samsung apps and more.

So, want to update your LTE Galaxy Note 10.1 P605M to UBUBMJ5 latest Android 4.3 Jelly Bean firmware? To install the official way, you can go to the OTA update as mentioned above or download and install the firmware via Samsung Kies utility for. However, if you prefer the manual way to update the official firmware, then follow this article to find step-by-step user guide for Android 4.3 update UBUBMJ5 latest firmware on your Galaxy Note 10.1 LTE P605M via Odin.


Important Note:


"The firmware is released only for the Samsung Galaxy Note 10.1 LTE SM-P605M model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet".


Android 4.3 Jelly Bean P605MUBUBMJ5 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 10.1 LTE SM-P605M model.
[Firmware for rest of the countries and carrier will be added here when available]


More Recent Firmware Build


Pre-Requisites:

Check battery percentage, your device should have at least 90% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver


Points to be noted:
  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 P605MUBU
BMJ5 official firmware on Galaxy Note 10.1 LTE P605M.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 10.1 LTE P605M through Odin:

  1. Download Android 4.3 UBUBMJ5 Firmware for Galaxy Note 10.1 LTE P605M from the above list
  2. Download Odin 3.07
  3. Switch off your Tablet and boot Galaxy Note 10.1 LTE P605M into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 10.1 LTE P605M to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
  9. In Odin screen, click on PDA button (if you are using the latest Odin Version, then click on AP button instead of PDA) and select the firmware file with .tar.md5 extension (The firmware file look something like: P605MXXDLJ5_P605MODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your Tablet should automatically reboot after completion
  13. You can now disconnect your Tablet from computer
  14. Finish
Thats all for updating firmware official Android 4.3 Jelly Bean on the Galaxy Note 10.1 LTE BC-P605M. Hope you get all the above points and successfully completed the tutorial. If you follow everything as mentioned in the tutorial above, then you P605M LTE Galaxy Note 10.1 should now be running on Android 4.3 Jelly Bean version UBUBMJ5 latest build. You can verify the details of the firmware update from Settings-About Tablet. If you have any questions or problems with the download link, do not hesitate to contact with us and do not forget to share your thoughts in the comments below.
Read More..

Wednesday, August 20, 2014

Download And Install KitKat Launcher Android 4 4

KitKat launcher (Launcher KK), a highly customized home replacement BEST. Neat, smooth, rich features, FREE, NO AD, you do not find the best Android 4.4 KitKat launcher until you try this one.
And now with the install instructions below

kitkat_launcher_061249241145_640x360
Features:
1. Based on the Android 4.4 launcher, support for Android 4.0+ users
2. Support icon theme, compatible with themes of Nova launcher, ADW, GO, Apex launcher
3. Translucent status bar and navigation bar (Android 4.4 and some devices with native support)
4. Support hide app in Drawer
5. Support edit icon individually
6. Allow swipe right to enter Google Now (depend on your version of Google Search)
7. Nexus 5 HD wallpapers
8. Highly customizable:
+ Set desktop grid
+ Set drawer grid
+ Set icon size
+ Set icon text size
+ Hide icon text
+ Max rows and columns of a folder
+ Number of dock icons
+ Dock icon size
+ Hide search bar
+ Infinite scrolling option
+ Set default Home Screen to Left, Middle or Right
+ Enable/Disable wallpaper scrolling
+ Background transparent
+More are coming: More customization options, edit icon, drawer folder, etc
kitkat_launcher_lead-450x400

What’s New:
■ v1.9 update(2013-11-25):
1. Translucent status bar and navigation bar for Android 4.4 phones
2. Edit icon (long press an icon on Desktop)
3. Infinite scrolling option
4. Hide icon text option (set text size to 0%)
5. Fix FC bugs

Google Play Store Link
Download APK File
Download APK File
g_launcher
How To Install Android 4.4 Kitkat Launcher On Your Device:
  1. Download APK File on your PC or on your android smartphone 
  2. Or Download APK file on your PC and then transfer it to your device
  3. Then install it through package installer and enjoy
  4. Or you can download and install Android 4.4 Launcher through Google Ply Store
kitkat_launcher_jelly_bean_-670x364
How To Install Android 4.4 Kitkat Launcher On Your PC:
  1. Download and Install android emulator Blue Stacks from HERE.
  2. Search Android 4.4 Kitkat Launcher and click on install
  3. The launcher will first downloaded and then installed 
  4. Open MY Apps in Blue Stacks and click on Android 4.4 Kitkat Launcher icon and enjoy. 
  5. Or download APK file and install it through Blue Stacks .
Read More..

Tuesday, August 19, 2014

How To Official Install Android 4 4 Kitkat In Samsung Galaxy Note 2

This is not the final build is released by Samsung, so the firmware may have some bugs. That is why, we are not responsible for any damage that may be caused during the update or after the update. Follow the post at your own risk.
Make sure that this update does not affect your device binary counter, the device warranty means youre in the safe-side. Now, you can flash the firmware without hesitation. Oops! I forgot to mention about the features. Yes, all the latest features announced by Google incurred in building includes two official apps from Samsung is the Samsung Knox and Samsung Wallet.

Firmware Details:
  • Model: GT-N7100
  • Country: Open Europe
  • Version: Android 4.3
  • Changelist: 1750609
  • Build date: Fri, 25 Sep 2013 18:06:49 +0000
  • Product Code: OXA
  • PDA: N7100XXUEMI6
  • CSC: N7100OXAEMI6
  • MODEM: N7100XXUEMI6
Before You Begin:
  • You need a Windows based PC or Laptop.
  • This stock rom is only for Samsung Galaxy Note 2 N7100.
  • Download Samsung USB Drivers and connect your device with PC for complete the installation.
SAMSUNG:
  1. Download Samsung USB Drivers or Download Samsung Kies (Contains Drivers).
  • Enable USB Debugging in your Samsung Galaxy Note 2.Click Here if you don’t know how to enable.
  • Your device must be charged 50% minimum.
  • Make backup of device data for safety.
Download Required Files:
How To Update Android 4.3 :
  • Download both Odin & Firmware Package in your PC.
  • Extract both Odin & Firmware Package in your PC.
  • Now Turn off your device completely.
  • Boot your device in Download mode , Press & Hold Volume Down + Home Button + Power Button.You will see a Android logo now press the listed button to enter in Download Mode.
  • Now launch the Odin .exe file and connect your device to PC with USB cable.
  • Wait for Odin to detect your device.ID:COM box in Odin turn Yellow after detecting.(Make sure the drivers is installed).
  • Now select files as per below instructions to install Android 4.3 jellybean on Samsung Galaxy Note 2
  1. Click on PDA button in Odin and select file with “CODE” in its name
  2. Click on Phone button in Odin and select file with “MODEM” in its name
  3. Click on CSC button in Odinand select file with “CSC” in its name
  4. Click on PIT button in Odin and select file with “.pit” in its name
  • Only check Auto Reboot & F.Reset option, don’t tick any other option.
  • Now click on Start button in Odin to start the installation process.It take few minutes to finish.
  • You will see a PASS message in Odin message box after successful installation.
  • Your device reboot automatically.First boot can take few minutes.
Read More..

Thursday, August 14, 2014

How to Install Custom Recovery For Most Android devices

Whenever you think of some of the custom recovery first name that comes to your mind is ClockworkMod recovery or TWRP recovery or perhaps a new member of the family custom recovery Philz Touch recovery. You need to have the latest custom recovery is supported if you want to perform tasks such as installation of custom ROMs before the latest or MODs. Before moving to the ways to install the latest version of ClockworkMod recovery or TWRP recovery easy, first of all we need to know a little about the stock recovery.



The entire Android devices transmit simultaneously with the recovery console that is basically a partition on your devices internal memory and can boot into. Stock recovery almost all Android devices provides a few basic yet handy options that allow you to factory reset your device and also to restore the operating system to use the official ROM in zip format, but its all you can do with it. Thats where a custom recovery comes handy.

A custom recovery replaces the stock recovery and in a manner that brings various functions previously that stock recovery is not necessary. With a custom recovery, you can either install the official (stock firmware) and unofficial ROMs as well as other updates including apps, themes, kernels etc. using zip files, can remove not only user data but pretty much every partition on your device, mount the storage card for USB mass storage access without leaving recovery, partition your SD card, wipe Dalvik cache and battery stats, fix permissions, perform, manage and restore backups and so on. However, most of the used custom recovery to flash or install a new ROM.

First get the custom recovery ClockworkMod recovery fame developed by Kush, the famous Android developer. However, the previous release of CWM recovery is not equipped with a touch (but is now available in a version supported touch) and to meet gaps custom touches supported recoveryTWRP comes out. Recently, developer Phil3759 rolled out an advance version of CWM recovery which we call PhilZ Touch 5 Recovery. It remove the boringness of custom recovery by offering various colourful customization features.
However, on this page we will discuss easy installation guide CWM recovery (the current latest version is 6.0.3.3) and TWRP recovery (currently the latest version is 2.6.0.1). PhilZ Touch Recovery comes with 5 different installation options for various models manufactured, thats why I do not cover it here. I discuss the installation guide here requires rooted device, so you must have a rooted Android smartphone or tablet. This tutorial should work most of the latest devices including the Galaxy S4, Xperia Z or HTC.

How To install latest CWM recovery on Most Android devices

  1. Download and install ROM manager app from Play Store. It’s available for free.
  2. Then tap on Recovery Setup and select ClockworkMod Recovery under Install or Update Recovery.
  3. Next confirm your device and in very next screen tap on Flash ClockworkMod Recovery.
  4. The app then download the recovery from internet and then ask for Superuser permission. Allow the app Superuser permission and wait till you see a Success massage.
  5. Now go back to ROM Manager main screen and tap on Reboot into Recovery. Confirm your action and soon your Android device boot into ClockworkMod recovery non-touch version. For need to purchase the touch version or find a flashable copy of it.
That’s it! Your Android device now have latest version (that available for your device) of CWM recovery installed. You can jump between recovery option through volume rocker and select an option using Power button (in some cases Home button).

How To install latest TWRP recovery on Most Android devices

You already learn installation steps for CWM recovery. Now, if you want a touch enabled custom recovery and unable to purchase or find touch version of CWM recovery for your device then try TWRP recovery aka TeamWin Recovery Project.
  1. Download and install GooManager app from Play Store. It’s available for free.
  2. Now open GooManager app then hit Menu button and later tap on Install OpenRecoveryScript from pop-up menu.
  3. Then confirm your action and follow on screen instruction. Select right device if various variant available. The app then download an .img file of TWRP and install it on your device.
  4. Once done, tap on Reboot recovery to boot into recovery. Confirm your action and soon you will see touch enabled TWRP screen.
That’s it. You now know how to flash custom recovery such as ClockworkMod recovery or TWRP on your device. Once done, go and find some custom ROM to enjoy your first modified OS experience.

For your note, recently developer DsLNeXuS from XDA develop an App called Recovery Tool which find and flash latest version of your choice of recovery between CWM recovery and TWRP. This way you can save your precious minutes. The app also allow you to flash a recovery from your phone’s internal or external memory.
Read More..