Showing posts with label ringer. Show all posts
Showing posts with label ringer. Show all posts
Sunday, November 16, 2014
nokia 5320xm Ringer and Hands Free Speaker No sound solution
This is the solution for nokia 5320 xpressmusic Ringer and hands free speaker failed to have an audio sounds output when the hands free mode is activated and or no ringtones can be heard. The solution below shows the location of particular components that needs to be check or then by replace if found damaged or faulty.
Nokia 5320 ringer, hands free speaker failure solution
After ensuring that the speaker is working okay but the problem still exists, locate the corresponding components showed on the solution above, these components are filter coils. You may need to rework the audio IC (AVILMA) for further deeper troubleshhoting and also by tracing the each earpiece line paths from the avilma solder ball bumps across to each filter coils and to the earpiece speaker terminal pads. Friday, November 14, 2014
Nokia Asha 201 Ringer Speaker Problem Solution Ways Jumpers
If the ring tone problem in Nokia Asha 201 SOND quality is too low or poor voice quality in Ringer Nokia Asha 201 you can solve this problem easily with this schedule that is posted with this first step post.
![Nokia]()
in ringer to checked, so if it shows little or poor voice continuity put this ring as it does not show continuity ringer does not work and changing damage.after ringer ok you might not vote, these two main points ring is connected to the board control chart can be found in these two prints in red and blue lines on the Lcd lines.both two different paths.you should also check these links with the meter and if one of them is broken or damaged, you can easily can jumper, as defined in diagram.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
in ringer to checked, so if it shows little or poor voice continuity put this ring as it does not show continuity ringer does not work and changing damage.after ringer ok you might not vote, these two main points ring is connected to the board control chart can be found in these two prints in red and blue lines on the Lcd lines.both two different paths.you should also check these links with the meter and if one of them is broken or damaged, you can easily can jumper, as defined in diagram.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Sunday, September 21, 2014
Tuesday, September 9, 2014
N8 Ringer Problem Ways Solution

your Nokia N8 Ringer a.k.a IHF-Speaker the one that is used for Music
and Ringtones stops working check the solution in the diagram below.
This solution is not for Earpiece speaker the one that is used for
calling if you need solution for Earpiece read this post Nokia N8
Speaker Earpiece Problem Ways Solution.
There is not a lot to explain this solution is pretty self explanatory
if replacing the ringer does not solve your problem or you have
damaged any of the IHF-Speaker prints make the jumpers as shown in
this diagram. If you don't know how to dissemble your phone read this
post Nokia N8 How To Dissemble Guide with Diagrams.
Please Note that we will edit these solutions or add new ones if found
in this page at any time in the future. So feel free to come back any
time on this page to stay up to date.
If you have further Questions please don't hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one
member of our team. Use the information available here at Your Own
Risk. We are not responsible if any harm comes to your device during
the repairing process.
Monday, August 18, 2014
Friday, August 15, 2014
Subscribe to:
Posts (Atom)


